1928-1940 Street Rods

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

1935-40 Ford Cross Steer®

1935-40 Ford Cross Steer®
Product Code: 8000510
Weight (lbs): 24.00
Price: $525.00
Qty:  
   - OR -   

The Cross Steer is essentially a small half rack and pinion that bolts into place exactly where the steering box would bolt on. The system still uses a draglink between both wheels. The Cross Steer was specifically designed for solid axle cars and trucks of this era. This specific Cross Steer us very similar to our '28-'32 Ford Cross Steer - the gear is essentially the same, but with a slightly slower ratio to accommodate these larger vehicles. The biggest difference is the mounting bracket; the large mounting bracket actually bolts up in between the frame rails on these Fords. A boxed frame will have to be opened up to accommodate the bracket. The bracket does hang down lower, so this Cross Steer will only work on cars with the stock axle or a 2" drop axle, it will not work with 4" drop axles.

The rack comes mounted to the bracket with drag link tube and mounting hardware. You will also need some U-joints and a shaft to connect down to the pinion. This manual rack will handle vehicles around 3500 lbs, check with engineering for any heavier applications.

Teck Info:

Kit Includes:
Pinion Type / Size: 9/16"-26 Spline Rack & Pinion
Amount of Travel: 6" Mounting Bracket
Turns Lock to Lock: 4.5 - 1.3 Ratio Mounting Hardware
Pressure Port Size: NA  
Return Port Size: NA  
Pump Required: NA CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS
Inner End Threads: Tube & Adapter 11/16"-18 Click here for IDIDIT Columns for your Streetrod!

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: