1949-1951 Fords

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

1949-51 Ford Power Rack & Pinion Kit w/o Headers

1949-51 Ford Power Rack & Pinion Kit w/o Headers
Product Code: 8012540
Weight (lbs): 60.00
Price: $1,929.00

Available Options


Spindles:

Pulley:

Qty:  
   - OR -   

Our kit is designed to fit in your stock Ford. It uses a one piece folded steel bracket that bolts in place where your idler arm and steering box used to be. It follows the same pivot points as your stock geometry therefor eliminating bump steer. The headers will provide an obstical and will most likely need to be modified. There isn't any loss in the factory turning radius. The pump kit is matched to the rack & pinion providing the correct flow and pressure for the optimal driving experience.

Note: Granada spindles have been used on this vehicle from time to time. If you have these, let us know with the drop down menu above so we can swap out the proper outer ends. Does not work with Automatic Columns.

Teck Info:

Kit Includes:
Pinion Type / Size: 17mm DD Rack & Pinion
Amount of Travel: 5.25" Outer Tie Rod Ends
Turns Lock to Lock: 2.5 Turns Mounting Bracket
Pressure Port Size: 6AN Banjo (Lower) Pump & Line Kit
Return Port Size: 6AN Banjo (Upper) Steering Shaft Kit
Pump Required: Factory or GM Type 2 Mounting Hardware
Inner End Threads: 9/16"-18 Headers
Outer ends: Included  
Granada Outer Ends 8021250 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: