1955-1964 Fords

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

1960-64 Ford Rack & Pinion Kit for Traditional Motors

1960-64 Ford Rack & Pinion Kit for Traditional Motors
Product Code: 8011410
Weight (lbs): 65.00
Price: $1,730.00

Available Options


Pulley:

Qty:  
   - OR -   

This is a rear steer center take-off style rack and pinion with a ball center bar that exactly matches the center link of the stock suspention for the '60-'64 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that held up the steering box and idler arm.

This is designed to be used with Traditional FE Motors found in these cars, including the 332, and 352. This kit has been installed on vehicles with stock manifolds. Other Headers may work, but might require modification or another u-joint in the column linkage.

Teck Info:

Kit Includes:
Pinion Type / Size: 17mm DD Rack & Pinion
Amount of Travel: 6" Outer Tie Rod Ends
Turns Lock to Lock: 2.5 - 2.75 Turns Mounting Bracket
Pressure Port Size: 18mm - 6AN Banjo Pump & Line Kit
Return Port Size: 16mm - 6AN Banjo Steering Shaft Kit
Pump Required: Low Flow / Pressure Mounting Hardware
Inner End Threads: 9/16"-18  
Outer ends: Included CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: