1955-1964 Fords

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

1955-1964 Fords

Display: List / Grid
Show:
Sort By:
1955-56 Ford Power Rack Only Kit
This is a rear steer center take-off style rack & pinion with a ball center bar that exactly matches the center link of the stock suspention for the '55-'56 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that help the steering box and idler arm. This kit has been successfully installed in cars with both the 272, 292, & 312 motors with stock manifolds. Other headers may work but might require modification or another u-joint in the column linkage. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD Rack & Pinion Amount of Travel: 6" Outer Tie Rod Ends Turns Lock to Lock: 2.5 - 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6AN Banjo Mounting Hardware Return Port Size: 16mm - 6AN Banjo   Pump Required: Matched - Low or High   Inner End Threads: 9/16"-18   Outer ends: Included CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$1,130.00
1955-56 Ford Rack & Pinion Kit
1955-56 Ford Rack & Pinion Kit
Product Code: 8011640
This is a rear steer center take-off style rack & pinion with a ball center bar that exactly matches the center link of the stock suspention for the '55-'56 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that help the steering box and idler arm. This kit has been successfully installed in cars with both the 272 and 292 motors with stock manifolds. Other headers may work but might require modification or another u-joint in the column linkage. Note: If you have a 312 or 352 motor our kit may work with modification & different pump bracket which we can supply. Also, This kit will not work with a manual shift column. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD Rack & Pinion Amount of Travel: 6" Outer Tie Rod Ends Turns Lock to Lock: 2.5 - 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6AN Banjo Pump & Line Kit Return Port Size: 16mm - 6AN Banjo Steering Shaft Kit Pump Required: Matched - Low or High Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: Included CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$2,140.00
1957-59 Ford Rack & Pinion for Popular Small Blocks
This is a rear steer center take-off style rack and pinion with a ball center bar that exactly matches the center link of the stock suspention for the '57-'59 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that held the steering box and idler arm. This kit is designed for use with Windsor Small Block Motors, the 289, 302, and 351. This kit has been installed on vehicles with stock manifolds. Other Headers may work, but might require modification or another u-joint in the column linnkage. Note: Granada spindles have been known to have been used on these vehicles. If you have these, let us know by using the drop down menu above so we can swap out the proper outer ends. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD Rack & Pinion Amount of Travel: 6" Outer Tie Rod Ends Turns Lock to Lock: 2.5 - 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6AN Banjo Pump & Line Kit Return Port Size: 16mm - 6AN Banjo Steering Shaft Kit Pump Required: Matched - Low or High Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: Included CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$1,720.00
1957-59 Ford Rack & Pinion Kit for Traditional Motors
This is a rear steer center take-off style rack and pinion with a ball center bar that exactly matches the center link of the stock suspention for the '57-'59 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that held the steering box and idler arm. This kit is designed for use with Traditional FE Block Motors found with these cars, the Ford 332 and 352. This kit has been installed on vehicles with stock manifolds. Other Headers may work, but might require modification or another u-joint in the column linnkage. Note: Granada spindles have been known to have been used on these vehicles. If you have these, let us know by using the drop down menu above so we can swap out the proper outer ends. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD Rack & Pinion Amount of Travel: 6" Outer Tie Rod Ends Turns Lock to Lock: 2.5 - 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6AN Banjo Pump & Line Kit Return Port Size: 16mm - 6AN Banjo Steering Shaft Kit Pump Required: Matched - Low or High Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: Included CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$1,599.00
1960-64 Ford Rack & Pinion for Popular Small Blocks
This is a rear steer center take-off style rack and pinion with a ball center bar that exactly matches the center link of the stock suspention for the '60-'64 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that held up the steering box and idler arm. This is designed to be used with Windsor Small Block Motors, including the 289, 302, and 351. This kit has been installed on vehicles with stock manifolds. Other Headers may work, but might require modification or another u-joint in the column linkage. Note: Granada Spindles have been used on these vehicles from time to time. If you have these, let us know in the drop down menu above, so we can swap out the correct outer ends. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD Rack & Pinion Amount of Travel: 6" Outer Tie Rod Ends Turns Lock to Lock: 2.5 - 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6AN Banjo Pump & Line Kit Return Port Size: 16mm - 6AN Banjo Steering Shaft Kit Pump Required: Matched - Low or High Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: Included CLICK HERE TO LOOK AT PRODUCT INSTRUCTION   ...
$1,780.00
1960-64 Ford Rack & Pinion Kit for Traditional Motors
This is a rear steer center take-off style rack and pinion with a ball center bar that exactly matches the center link of the stock suspention for the '60-'64 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that held up the steering box and idler arm. This is designed to be used with Traditional FE Motors found in these cars, including the 332, and 352. This kit has been installed on vehicles with stock manifolds. Other Headers may work, but might require modification or another u-joint in the column linkage. Note: Granada Spindles have been used on these vehicles from time to time. If you have these, let us know in the drop down menu above, so we can swap out the correct outer ends. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD Rack & Pinion Amount of Travel: 6" Outer Tie Rod Ends Turns Lock to Lock: 2.5 - 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6AN Banjo Pump & Line Kit Return Port Size: 16mm - 6AN Banjo Steering Shaft Kit Pump Required: Matched - Low or High Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: Included CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$1,730.00
Big Block Ford-390, 427, 428/Clip-on Reservoir Pump Kit
This kit includes a C-5 pump w/res. high flow GM 6, and TC clip-on resevoir for a Big Block engine. ...
$442.00
Ford Big Block Pump Bracket (Steel)
This bracket kit is designed to be used with our GM Type II/TC power steering pump. ...
$43.00
Ford Small Block Pump Bracket (Steel)
This bracket kit is designed to be used with our GM Type II/TC power steering pump. ...
$93.00
Small Block Ford-289, 351 Clip-on Reservoir Pump Kit
This kit includes a C-5 pump w/res. high flow GM6, and TC resevoir for a Small Block engine. ...
$442.00