phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

1967-72 Chevy C10 w/disks Power Rack & Pinion Kit

1967-72 Chevy C10 w/disks Power Rack & Pinion Kit
Product Code: 8011650-01
Weight (lbs): 54.00
Price: $1,690.00

Available Options


Pulley:

Column Shaft:

Chevy Pumps:

Qty:  
   - OR -   

On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms.

This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit.

Note: If using drum brake spindles order kit 8011900-01.

Teck Info:

Kit Includes:
Pinion Type / Size: 3/4"-DD Rack & Pinion
Amount of Travel: 5.75" Mounting Bracket
Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit
Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit
Return Port Size: Straight to #6 AN (lower) Mounting Hardware
Pump Required: Low Flow Outer Tie Rod Ends
Inner End Threads: M14 x 1.5  
Outer ends: 8026690 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: