B-Body

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

B-Body

Display: List / Grid
Show:
Sort By:
1968-72 Mopar B Body Big Block Power Rack & Pinion Kit, Black
With the Mopars, Unisteer was able to use a traditional style rack & pinion mounted to a large one piece bracket. This bracket folows the same lines bolting into the same holes that mounted the steering box and the idler arm. The entire rack and pinion has been machined, narrowing the pivot points to match the steering geometry of the stock front suspentions of these cars. The kit will work with stock manifolds, and TTI Headers with 1 7/8" Ptimary Tubes (TTI Part #383-178) have also been used. Other headers may work, but might require modifications. Once installed, the rack does make getting to the factory oil plug a little more difficult, which you can work around, or you may consider moving the plug. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-36 Spline Rack & Pinion Amount of Travel: 5 1/8" Outer Tie Rod Ends Turns Lock to Lock: 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Banjo (Lower) Pump & Line Kit Return Port Size: 16mm - 6 AN Banjo (Upper) Steering Shaft Kit Pump Required: Low Flow / Low Pressure Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: 8020960 Click here to view installation instructions.   ...
$1,294.00
1968-72 Mopar B Body Big Block Power Rack & Pinion Kit, Chrome
With the Mopars, Unisteer was able to use a traditional style rack & pinion mounted to a large one piece bracket. This bracket folows the same lines bolting into the same holes that mounted the steering box and the idler arm. The entire rack and pinion has been machined, narrowing the pivot points to match the steering geometry of the stock front suspentions of these cars. The kit will work with stock manifolds, and TTI Headers with 1 7/8" Ptimary Tubes (TTI Part #383-178) have also been used. Other headers may work, but might require modifications. Once installed, the rack does make getting to the factory oil plug a little more difficult, which you can work around, or you may consider moving the plug. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-36 Spline Rack & Pinion Amount of Travel: 5 1/8" Outer Tie Rod Ends Turns Lock to Lock: 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Banjo (Lower) Pump & Line Kit Return Port Size: 16mm - 6 AN Banjo (Upper) Steering Shaft Kit Pump Required: Low Flow / Low Pressure Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: 8020960 Click here to view installation instructions.   ...
$1,590.00
1968-72 Mopar B Body Small Block Power Rack & Pinion Kit, Black
With the Mopars, Unisteer was able to use a traditional style rack & pinion mounted to a large one piece bracket. This bracket follows the same lines bolting into the same holes that mounted the steering box and the idler arm. The entire rack and pinion has been machined, narrowing the pivot points to match the steering geometry of the stock front suspentions of these cars. The kit will work with stock manifolds, and TTI Headers with 1 7/8" Ptimary Tubes (TTI Part #383-178) have also been used. Other headers may work, but might require modifications. Once installed, the rack does make getting to the factory oil plug a little more difficult, which you can work around, or you may consider moving the plug. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-36 Spline Rack & Pinion Amount of Travel: 5 1/8" Outer Tie Rod Ends Turns Lock to Lock: 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Banjo (Lower) Pump & Line Kit Return Port Size: 16mm - 6 AN Banjo (Upper) Steering Shaft Kit Pump Required: Low Flow / Low Pressure Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: 8020960 Click here to view installation instructions. ...
$1,295.00
1968-72 Mopar B Body Small Block Power Rack & Pinion Kit, Chrome
With the Mopars, Unisteer was able to use a traditional style rack & pinion mounted to a large one piece bracket. This bracket follows the same lines bolting into the same holes that mounted the steering box and the idler arm. The entire rack and pinion has been machined, narrowing the pivot points to match the steering geometry of the stock front suspentions of these cars. The kit will work with stock manifolds, and TTI Headers with 1 7/8" Ptimary Tubes (TTI Part #383-178) have also been used. Other headers may work, but might require modifications. Once installed, the rack does make getting to the factory oil plug a little more difficult, which you can work around, or you may consider moving the plug. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-36 Spline Rack & Pinion Amount of Travel: 5 1/8" Outer Tie Rod Ends Turns Lock to Lock: 2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Banjo (Lower) Pump & Line Kit Return Port Size: 16mm - 6 AN Banjo (Upper) Steering Shaft Kit Pump Required: Low Flow / Low Pressure Mounting Hardware Inner End Threads: 9/16"-18   Outer ends: 8020960 Click here to view installation instructions ...
$1,590.00
Mopar Big Block Bracket (Steel)
Mopar Big Block Bracket (Steel)
Product Code: 8023770
This bracket kit is designed to be used with our GM Type II/TC power steering pump. ...
$78.00
Mopar Small Block Bracket (Steel)
This bracket kit is designed to be used with our GM Type II/TC power steering pump. ...
$104.00