Bel-Air / Impala

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

Bel-Air / Impala

Display: List / Grid
Show:
Sort By:
1958-64 Impala/Bel Air Big Block S.W.P Rack and Pinion Kit for Ididit Column
This is a front steer center take off style rack & pinion that matches the stock front end and suspention. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts. Our kit probably will not work with aftermarket suspention that change the original suspention, but give us a call! This kit works on most big block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available. Note: Kit can be adapted to fit your needs by selecting the pulley option above. Teck Info: Kit Includes: Pinion Type / Size: 3/4" - 36 Spline Rack & Pinion Amount of Travel: 7" Outer Tie Rod Ends Turns Lock to Lock: 3 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Pump & Line Kit Return Port Size: 16mm -...
$1,775.00
1958-64 Impala/Bel Air Big Block Short Water Rack and Pinion Kit
This is a front steer center take off style rack & pinion that matches the stock front end and suspention. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts. Our kit probably will not work with aftermarket suspention that change the original suspention, but give us a call! This kit works on most big block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available. Note: Kit can be adapted to fit your needs by selecting the pulley option above. Teck Info: Kit Includes: Pinion Type / Size: 3/4" - 36 Spline Rack & Pinion Amount of Travel: 7" Outer Tie Rod Ends Turns Lock to Lock: 3 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Pump & Line Kit Return Port Size: 16mm -...
$1,775.00
1958-64 Impala/Bel Air Power Rack Only Kit
This is a front steer center take off style rack & pinion that matches the stock front end and suspension. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts. Our kit probably will not work with aftermarket suspension that change the original suspension, but give us a call! This kit works on most big block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available. Note: Kit can be adapted to fit your needs by selecting the pulley option above. Teck Info: Kit Includes: Pinion Type / Size: 3/4" - 36 Spline Rack & Pinion Amount of Travel: 7" Outer Tie Rod Ends Turns Lock to Lock: 3 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Mounting Hardware Return Port Size: 16mm - 8...
$1,130.00
1958-64 Impala/Bel Air Small Block S.W.P. Rack and Pinion Kit for Ididit Column
This is a front steer center take off style rack & pinion that matches the stock front end and suspention. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts. Our kit probably will not work with aftermarket suspention that change the original suspention, but give us a call! This kit works on most small block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available. Note: Kit can be adapted to fit your needs by selecting the pulley option above. Teck Info: Kit Includes: Pinion Type / Size: 3/4" - 36 Spline Rack & Pinion Amount of Travel: 7" Outer Tie Rod Ends Turns Lock to Lock: 3 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Pump & Line Kit Return Port Size: 16mm...
$1,599.00
1958-64 Impala/Bel Air Small Block Short Water Rack and Pinion Kit
This is a front steer center take off style rack & pinion that matches the stock front end and suspention. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts. Our kit probably will not work with aftermarket suspention that change the original suspention, but give us a call! This kit works on most small block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available. Note: Kit can be adapted to fit your needs by selecting the pulley option above. Teck Info: Kit Includes: Pinion Type / Size: 3/4" - 36 Spline Rack & Pinion Amount of Travel: 7" Outer Tie Rod Ends Turns Lock to Lock: 3 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Pump & Line Kit Return Port Size: 16mm...
$1,599.00
1965-66 Impala/Bel Air Power Rack & Pinion Kit
Similar to our earlier model Impala / Bel Air Rack, this kit uses a rear steer center take off rack & pinion. The mounting bracket consists of a one piece bracket that spans the frame rail plus an adaptor plate for the passenger side frame rail that uses the same steel rod mount that the factory used for the idler arm. (Check out our instructions for pictures!) This kit will fit with Small Block motor applications with stock manifolds or Hooker Long Tube headers. Other headers may work with modification or an extra u-joint. The kit does clear the Z-Bar and 4 Speed Linkage. This kit has not worked in Big Block applications. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD GM Rack & Pinion Amount of Travel: 6" Outer Tie Rod Ends Turns Lock to Lock: 2.5-2.75 Turns Mounting Bracket Pressure Port Size: 18mm - 6 AN Pump & Line Kit Return Port Size: 16mm - 8AN Steering Shaft Kit Pump Required: Varies on the Gear - Low or High Flow Mounting Hardware Inner End Threads: M14 x 1.5   Outer ends: 8020940 Click here to view installation instructions   ...
$1,599.00
Chevy Big Block Clip-on Reservoir Long Water Pump Kit
This kit includes an UNPOLISHED C-5 TC low flow pump, and TC reservoir for a long water pump Big Block engine. ...
$442.00
Chevy Big Block Clip-on Reservoir Short Water Pump Kit
This kit includes an UNPOLISHED C-5 TC low flow pump and TC resevoir for a short water pump Big Block engine. ...
$305.00
Chevy Big Block Long Water Pump Bracket (Steel)
This bracket kit is designed to be used with our GM Type II/TC power steering pump. ...
$118.00
Chevy Big Block Remote Reservoir Long Water Pump Kit
This kit includes a POLISHED C-5 TC pump with OE fitting low, and remote reservoir for a long water pump Big Block engine. ...
$511.00
Chevy Big Block Remote Reservoir Short Water Pump Kit
This kit includes a POLISHED C-5 pump with OE fitting low, and a remote resevoir for a short water pump Big Block engine. ...
$488.00
Chevy Big Block Short Water Pump Bracket (Aluminum)
This billet bracket is adjustable and comes polished to a show quality finish. The bracket adjusts 3/4" from front-to-back which enables you to properly align all of your accessories and pulleys to meet your application needs. This adjustability compensates for slight variations in aftermarket water pumps, dampers, and end-of-head machining tolerances. Includes: Fasteners Adjusting Bars ...
$142.00
Chevy High Flow SB Short Water Pump Kit w/Remote Resevoir (Polished)
This power steering pump kit is designed to compliment our Chevy Rack-Only kits. This kit includes a POLISHED pump and POLISHED remote resevoir for a short water pump Small Block engine. The pump is a high flow pump running at about 1500 psi and 3 gpm. ...
$477.00
Chevy LT1 GEN II /TC PS Pump Bracket (Aluminum)
This billet bracket is adjustable and comes polished to a show quality finish. The bracket fits LT1 motors, for use with GM Type II TC Style Pump. Includes: Fasteners Adjusting Bars ...
$195.00
Chevy Small Block Clip-on Reservoir Short Water Pump Kit (High Mount)
This kit includes an UNPOLISHED C-5 TC low flow pump, and TC resevoir for a short water pump Small Block engine. High Mount on Motor. ...
$304.00
Chevy Small Block Clip-on Reservoir Short Water Pump Kit (Low Mount)
Low Mount pump. Includes: Unpolished C-5 TC low flow pump TC resevoir for a long water pump Small Block engine. ...
$305.00
Chevy Small Block Remote Reservoir Long Water Pump Kit
This kit includes a POLISHED C-5 pump with OE fitting low, and remote resevoir for a long water pump Small Block engine. ...
$445.00