Bolt In Rack & Pinions


Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

1970-74 Mopar E Body Small Block Power Rack & Pinion Kit, Black

1970-74 Mopar E Body Small Block Power Rack & Pinion Kit, Black
Product Code: 8010660-01
Weight (lbs): 49.00
Price: $1,295.00

Available Options


   - OR -   

With the Mopars, Unisteer was able to use a traditional style rack & pinion mounted to a large one piece bracket. This bracket folows the same lines bolting into the same holes that mounted the steering box and the idler arm. The entire rack and pinion has been machined, narrowing the pivot points to match the steering geometry of the stock front suspentions of these cars.

The kit will work with stock manifolds, and TTI Headers with 1 7/8" Ptimary Tubes (Part # TTi383-178 ) have also been used. Other headers may work, but might require modifications. Once installed, the rack does make getting to the factory oil plug a little more difficult, which you can work around, or you may consider moving the plug.

Teck Info:

Kit Includes:
Pinion Type / Size: 3/4"-36 Spline Rack & Pinion
Amount of Travel: 6" Outer Tie Rod Ends
Turns Lock to Lock: 3.25 Turns Mounting Bracket
Pressure Port Size: 18mm - 6 AN Banjo (Lower) Pump & Line Kit
Return Port Size: 16mm - 6 AN Banjo (Upper) Steering Shaft Kit
Pump Required: Low Flow / Low Pressure Mounting Hardware
Inner End Threads: 9/16"-18  
Outer ends: 8027450 Click here to view installation instructions

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: