Bolt In Rack & Pinions

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

C10

Display: List / Grid
Show:
Sort By:
1960-66 Chevy C10 w/discs Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Note: If using drum brake spindles order kit 8011740-01. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow Outer Tie Rod Ends Inner End Threads: M14 x 1.5   Outer ends: 8026690 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,449.00
1960-66 Chevy C10 w/drums Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Note: If using disk brake spindles order kit 8011920-01. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow Outer Tie Rod Ends Inner End Threads: M14 x 1.5   Outer ends: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,449.00
1967-70 Chevy C10 w/drums Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Note: If using disk brake spindles order kit 8011650-01. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow Outer Tie Rod Ends Inner End Threads: M14 x 1.5   Outer ends: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,449.00
1967-72 Chevy C10 w/disks Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Note: If using drum brake spindles order kit 8011900-01. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow Outer Tie Rod Ends Inner End Threads: M14 x 1.5   Outer ends: 8026690 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,690.00
1973-87 Chevy C10 Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow   Inner End Threads: M14 x 1.5   Outer ends: Uses Factory CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,799.00