Bolt In Rack & Pinions

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

Corvette

Display: List / Grid
Show:
Sort By:
1958-62 Corvette Manual Rack & Pinion Kit w/ Column
This is a complete kit that starts with a rear steer center take off style rack & pinion made to match the stock suspention of these Corvettes. The rack is mounted to a one piece bracket that mounts to the stock motor mounts. The kit does clear the z-bar and 4 speed linkage. This kit works on Small Block motor cars with stock manifolds or Shorty headers. Other headers may work with modification. This kit is complete, everything that you need is included. The shaft kits use three u-joints and a support bearing. This connects up with a new Ididit retrofit column. You must use the column to use this kit!  Floor Bracket and Gasket are included. We also include the hub adaptor and flasher kit. Unisteer's most detailed kit! Teck Info: Kit Includes: Pinion Type / Size: 9/16"-26 Spline Rack & Pinion Amount of Travel: 6" Mounting Bracket Turns Lock to Lock: 3 Turns Mounting Hardware Pressure Port Size: NA Steering Shaft Kit Return Port Size: NA Ididit Column Pump Required: NA   Inner End Threads: 14mm x 1.5   Outer End Threads: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$1,810.00
1958-62 Corvette Manual Rack & Pinion Kit w/o Column
This is a complete kit that starts with a rear steer center take off style rack & pinion made to match the stock suspention of these Corvettes. The rack is mounted to a one piece bracket that mounts to the stock motor mounts. The kit does clear the z-bar and 4 speed linkage. This kit works on Small Block motor cars with stock manifolds or Shorty headers. Other headers may work with modification. Everything that you need is included minus the ididit column. The shaft kits use three u-joints and a support bearing. This connects up with a new Ididit retrofit column. You must use the column to use this kit!  Floor Bracket and Gasket are included. Note: An Ididit retrofit Column is needed for this kit to work. If you don't have one please order kit 8002090. Teck Info: Kit Includes: Pinion Type / Size: 9/16"-26 Spline Rack & Pinion Amount of Travel: 6" Mounting Bracket Turns Lock to Lock: 3 Turns Mounting Hardware Pressure Port Size: NA Steering Shaft Kit Return Port Size: NA   Pump Required: NA   Inner End Threads: 14mm x 1.5   Outer End Threads: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$1,049.00
1958-62 Corvette Power Rack & Pinion Kit w/ Column
This is a complete kit that starts with a rear steer center take off style rack & pinion made to match the stock suspention of these Corvettes. The rack is mounted to a one piece bracket that mounts to the stock motor mounts. The kit does clear the z-bar and 4 speed linkage. This kit works on Small Block motor cars with stock manifolds or Shorty headers. Other headers may work with modification. This kit is complete, everything that you need is included. The shaft kits use three u-joints and a support bearing. This connects up with a new Ididit retrofit column. You must use the column to use this kit!  Floor Bracket and Gasket are included. A pump kit with bracket to mount to the block is included which comes with a remote reservoir, single V-groove pulley and lines. We also include the hub adaptor and flasher kit. Unisteer's most detailed kit! Teck Info: Kit Includes: Pinion Type / Size: 17mm DD GM Rack & Pinion Amount of Travel: 6" Mounting Bracket Turns Lock to Lock: 2.5-2.75 Turns Mounting Hardware Pressure Port Size: 18mm - 6AN Banjo (Lower) Pump & Line Kit Return Port Size: 16mm - 6AN Banjo (Upper) Steering Shaft Kit Pump Required: Low Flow / Pressure Ididit Column Inner End Threads: 14mm x 1.5   Outer End Threads: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$2,350.00
1958-62 Corvette Power Rack & Pinion Kit w/o Column
This is a complete kit that starts with a rear steer center take off style rack & pinion made to match the stock suspention of these Corvettes. The rack is mounted to a one piece bracket that mounts to the stock motor mounts. The kit does clear the z-bar and 4 speed linkage. This kit works on Small Block motor cars with stock manifolds or Shorty headers. Other headers may work with modification. Everything that you need is included minus the ididit column. The shaft kits use three u-joints and a support bearing. This connects up with a new Ididit retrofit column. You must use the column to use this kit!  Floor Bracket and Gasket are included. A pump kit with bracket to mount to the block is included which comes with a remote reservoir, single V-groove pulley and lines. Note: An Ididit retrofit Column is needed for this kit to work. If you don't have one please order kit 8012420. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD GM Rack & Pinion Amount of Travel: 6" Mounting Bracket Turns Lock to Lock: 2.5-2.75 Turns Mounting Hardware Pressure Port Size: 18mm - 6AN Banjo (Lower) Pump & Line Kit Return Port Size: 16mm - 6AN Banjo (Upper) Steering Shaft Kit Pump Required: Matched to Gear   Inner End Threads: 14mm x 1.5 &n...
$1,995.00
1963-67 Corvette Manual Rack and Pinion w/ Shaft Kit
Unisteer's Manual Rack kits utilize center take off style rear steer rack & pinions with a ball center which matches the original center link for these Vettes. Geometrically correct - No Bump Steer! The racks come on one piece mounting brackets which bolt on using the same factory holes for the steering box and idler arm. These kits clear the Z-Bar and 4 Speed Linkage with no problem. The kits have worked on Small Block motor cars with stock manifolds, short or long tube headers. Teck Info: Kit Includes: Pinion Type / Size: 9/16"-26 Spline Rack & Pinion Amount of Travel: 6" Mounting Bracket Turns Lock to Lock: 3.75 Turns Mounting Hardware Pressure Port Size: NA Steering Shaft Kit Return Port Size: NA   Pump Required: NA   Inner End Threads: 14mm x 1.5   Outer End Threads: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$1,100.00
1963-82 Corvette Power Rack and Pinion Kit
Unisteer's Power Rack kits utilize center take off style rear steer rack & pinions with a ball center which matches the original center link for these Vettes. Geometrically correct - No Bump Steer! The racks come on one piece mounting brackets which bolt on using the same factory holes for the steering box and idler arm. These kits clear the Z-Bar and 4 Speed Linkage with no problem. The kits have worked on Small Block motor cars with stock manifolds, short or long tube headers. Pump and Shaft Kits are not included in the basic rack kits due to differences in the year break down for Vettes. We do recommend trying our pump and shaft kit, but that is up to you. Nore: This kit will not work with 68'-82' Big Block applications. Teck Info: Kit Includes: Pinion Type / Size: 17mm DD GM Rack & Pinion Amount of Travel: 6" Mounting Bracket Turns Lock to Lock: 2.5-2.75 Turns Mounting Hardware Pressure Port Size: 18mm - 6AN Banjo (Lower)   Return Port Size: 16mm - 6AN Banjo (Upper)   Pump Required: Low Flow / Pressure   Inner End Threads: 14mm x 1.5   Outer End Threads: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS   ...
$1,130.00