Bolt In Rack & Pinions

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

1968-72 Mopar B Body Big Block Power Rack & Pinion Kit, Chrome

1968-72 Mopar B Body Big Block Power Rack & Pinion Kit, Chrome
Product Code: 8010630-02
Weight (lbs): 49.00
Price: $1,590.00

Available Options


Pulley:

Qty:  
   - OR -   

With the Mopars, Unisteer was able to use a traditional style rack & pinion mounted to a large one piece bracket. This bracket folows the same lines bolting into the same holes that mounted the steering box and the idler arm. The entire rack and pinion has been machined, narrowing the pivot points to match the steering geometry of the stock front suspentions of these cars.

The kit will work with stock manifolds, and TTI Headers with 1 7/8" Ptimary Tubes (TTI Part #383-178) have also been used. Other headers may work, but might require modifications. Once installed, the rack does make getting to the factory oil plug a little more difficult, which you can work around, or you may consider moving the plug.

Teck Info:

Kit Includes:
Pinion Type / Size: 3/4"-36 Spline Rack & Pinion
Amount of Travel: 5 1/8" Outer Tie Rod Ends
Turns Lock to Lock: 2.75 Turns Mounting Bracket
Pressure Port Size: 18mm - 6 AN Banjo (Lower) Pump & Line Kit
Return Port Size: 16mm - 6 AN Banjo (Upper) Steering Shaft Kit
Pump Required: Low Flow / Low Pressure Mounting Hardware
Inner End Threads: 9/16"-18  
Outer ends: 8020960 Click here to view installation instructions.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: