C10

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

C10

Display: List / Grid
Show:
Sort By:
1955-68 GM Horn Kit
1955-68 GM Horn Kit
Product Code: 8150820
ididit's 1955-68 Horn Kit has everything you need to adapt most 55-68 GM stock steering wheels to your ididit steering column. Comes complete with aluminum trim ring, horn contact plate, spring, pin, and retainer. ...
$29.83
1960-66 Chevy C10 w/discs Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Note: If using drum brake spindles order kit 8011740-01. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow Outer Tie Rod Ends Inner End Threads: M14 x 1.5   Outer ends: 8026690 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,449.00
1960-66 Chevy C10 w/drums Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Note: If using disk brake spindles order kit 8011920-01. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow Outer Tie Rod Ends Inner End Threads: M14 x 1.5   Outer ends: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,449.00
1963-66 Chevy/Chevy Truck Ididit 4-Way Flasher Kit
This wiring kit is used to adapt your Full Size Chevy and Chevy Truck stock wiring to your ididit column, while adding the safety of a 4-way flasher to your vehicle. ...
$39.57
1967-70 Chevy C10 w/drums Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Note: If using disk brake spindles order kit 8011650-01. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow Outer Tie Rod Ends Inner End Threads: M14 x 1.5   Outer ends: 8020940 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,449.00
1967-72 Chevy C10 w/disks Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Note: If using drum brake spindles order kit 8011900-01. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow Outer Tie Rod Ends Inner End Threads: M14 x 1.5   Outer ends: 8026690 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,690.00
1973-87 Chevy C10 Power Rack & Pinion Kit
On this kit we used a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms. This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley  on your water pump is required for this kit. Teck Info: Kit Includes: Pinion Type / Size: 3/4"-DD Rack & Pinion Amount of Travel: 5.75" Mounting Bracket Turns Lock to Lock: 2 7/8 Turns Pump & Line Kit Pressure Port Size: Straight to #6 AN (upper) Steering Shaft Kit Return Port Size: Straight to #6 AN (lower) Mounting Hardware Pump Required: Low Flow   Inner End Threads: M14 x 1.5   Outer ends: Uses Factory CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS ...
$1,799.00
Chevy Big Block Clip-on Reservoir Long Water Pump Kit
This kit includes an UNPOLISHED C-5 TC low flow pump, and TC reservoir for a long water pump Big Block engine. ...
$442.00
Chevy Big Block Clip-on Reservoir Short Water Pump Kit
This kit includes an UNPOLISHED C-5 TC low flow pump and TC resevoir for a short water pump Big Block engine. ...
$305.00
Chevy Big Block Long Water Pump Bracket (Steel)
This bracket kit is designed to be used with our GM Type II/TC power steering pump. ...
$118.00
Chevy Big Block Remote Reservoir Long Water Pump Kit
This kit includes a POLISHED C-5 TC pump with OE fitting low, and remote reservoir for a long water pump Big Block engine. ...
$511.00
Chevy Big Block Remote Reservoir Short Water Pump Kit
This kit includes a POLISHED C-5 pump with OE fitting low, and a remote resevoir for a short water pump Big Block engine. ...
$488.00
Chevy High Flow SB Short Water Pump Kit w/Remote Resevoir (Polished)
This power steering pump kit is designed to compliment our Chevy Rack-Only kits. This kit includes a POLISHED pump and POLISHED remote resevoir for a short water pump Small Block engine. The pump is a high flow pump running at about 1500 psi and 3 gpm. ...
$477.00
Chevy LT1 GEN II /TC PS Pump Bracket (Aluminum)
This billet bracket is adjustable and comes polished to a show quality finish. The bracket fits LT1 motors, for use with GM Type II TC Style Pump. Includes: Fasteners Adjusting Bars ...
$195.00
Chevy Small Block Clip-on Reservoir Short Water Pump Kit (High Mount)
This kit includes an UNPOLISHED C-5 TC low flow pump, and TC resevoir for a short water pump Small Block engine. High Mount on Motor. ...
$304.00
Chevy Small Block Clip-on Reservoir Short Water Pump Kit (Low Mount)
Low Mount pump. Includes: Unpolished C-5 TC low flow pump TC resevoir for a short water pump Small Block engine. ...
$305.00
Chevy Small Block Remote Reservoir Long Water Pump Kit
This kit includes a POLISHED C-5 pump with OE fitting low, and remote resevoir for a long water pump Small Block engine. ...
$445.00
Ididit Tilt Column Floor Shift, 1967-72 Chevy Truck, Black Powder Coated
This retrofit column is designed to fit your C10. This Chevy Style column features all Chevy wiring and a C10 top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item has a collapsible inner shaft. Using this installation kit you will be able to install your new steering column in place of the old. Includes: 8-Position Tilt Ford Turn Signal Switch Ford Style Knobs and Levers Ford Top Shaft 3/4" 36 Lower Shaft ...
$561.99
Underdash Mount Chevy 2 1/4" Hole, Brushed
ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes. Made in America ...
$93.00
Underdash Mount Chevy 2 1/4" Hole, Polished
ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes. Made in America ...
$93.00
Underdash Mount Chevy 2" Hole, Brushed
ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes. Made in America ...
$93.00
Underdash Mount Chevy 2" Hole, Polished
ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes. Made in America ...
$93.00