Chevelle

phone.png1-800-338-9080

Shopping Cart

0 item(s) - $0.00
Your shopping cart is empty!
Welcome visitor you can login or create an account.

1968-72 GM A-Body Big Block Long Water Power Rack and Pinion Kit

1968-72 GM A-Body Big Block Long Water Power Rack and Pinion Kit
Product Code: 8010740-01
Weight (lbs): 66.00
Price: $1,750.00

Available Options


Pulley:

Qty:  
   - OR -   

This kit is made for the Chevelles and other GM A-Body cars. In these years of Chevelles, we used a front steer center take off style rack and pinion on a one piece bracket that bolts up in the same location as the original steering box and idler arm. This kit does clear the Z-Bar and 4 Speed Linkage. We have installed this kit on cars with both big block and small block motors. On the Big Block, stock manifolds and Super Comp Headers work, and on the Small Block motor Hooker Comp Headers work. Other headers may work, but may need modification.

The kit is set uo to go on cars with either small blocks or bick blocks with long water pumps. If you have a short water pump, we can easily accommodate, but you will need to call us, and we'll swap in the proper components.

Note: Some aftermarket cylinder heads may have a raised exaust floor anywhere from 0.25" - 0.4" which may also affect your header location.

Note: This kit will also bolt into a 1968-72 small block El Camino and Monte Carlo.

A special note on big block motors: There are several different designs, Mark IV, Mark V, and Mark VI. The original Mart IV design has a deck height of 9.8", the Mark V and Mark VI designs have a deck height of 10.2". The 0.4" difference affects clearance on these big block cars. Mark V and Mark VI designed cars will probably need more header modification.

Teck Info:

Kit Includes:
Pinion Type / Size: 3/4" - 36 Spline Rack & Pinion
Amount of Travel: 7" Mounting Bracket
Turns Lock to Lock: 3 Turns Pump & Line Kit
Pressure Port Size: 18mm - 6 AN Steering Shaft Kit
Return Port Size: 16mm - 8AN Mounting Hardware
Pump Required: High Flow / Pressure  
Inner End Threads: M14 x 1.5 CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS
Outer End Threads: 8020940 Cick here to look at ididit Chevelle Columns

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: