Unisteer Blog

phone.png1-800-338-9080

Unisteer Performance Blog

News and information from our company

U-joint fits loose

Most of our polished stainless steel u-joints are clamped down by pinch bolts. These sometimes take more then 45 ft lbs of torque to tighten them down. You can torque these pinch bolts down to as much as 80 ft lbs if necessary to tighten the joint. Our u-joints are strong and will not break. They provide the maximum angle of operation at about 38 degrees. http://www.unisteer.com/u-joints.html

We sell Ididit.
Limiting Rack and Pinion Travel