Electric Power Steering

This kit is BIGGER, BADDER, & BETTER than our earlier successful model. This kit features a 30% stronger motor that will reduce effort in vehicles steering wheels that weigh up to 4500lbs. The new computer modules are now in a sealed weather resistant box and can withstand very harsh conditions. This is a universal kit that includes the basic kit components as pictured.

In addition to this kit, you will need an assortment of u-joints, couplers, and a steering shaft that can be purchased together on this site. Both the input and output spline on the electric motor are unique. There are options you can choose from above.

Note: All U-Joints and couplers in the drop down menus fit the 17mm x 36 spline of the Electra-Steer Motor.

Includes:

• Electric Motor
• Control Module
• Wiring
• Mount Bracket

Click Here to Look at Product Instructions

This unit is meant to be used in conjunction with our Electra-Steer units. With this installed, you will be able to manualy adjust how much assist our Elecra-Steer units provide.

Note: This unit only works for the 220w and 360w Electra-Steer motors. The discontinued 170w motors use different plugs.

Click Here to Look at Product Instructions

Unisteer's Improved Electra-Steer is a compact electric assist unit that reduces steering effort by up to 35% compared to traditional manual steering units. The column's overall length is 39", but can be modified upon request.

Note: If you wish to receive a custom length column, please Click Here for a custom design form to fill out with your order.

Includes:

• Improved Electra-Steer built into Ididit column (motor, module, & wiring)
• 2 inch Ididit Floor Shift Tilt Chrome Steering Column
• Cut to fit lower steering shaft

Click Here to Look at Product Instructions

This is a replacement motor for all Electra-Steer 170 watt electric kits. Shaft ends are 9/16" - 30 splines.

This is a replacement motor for all Electra-Steer 220 watt electric kits. Shaft ends are 17MM - 36 splines. 

Electra-Steer U-Joints can be found here

A replacement module for all of our 360 watt Electra-Steer kits.

Try out Unisteer's Chevelle Electra-Steer. Get power steering without the hydraulics! Unisteer combined our great 360w Electra-Steer motor with Ididit's retrofit column for a drop in power steering solution for your 1969-72 Chevelle. Everything is included! Motor, column, and the power steering motor will tuck up underneath the dash.

Note: This unit is ony for '69-'72 model Chevelle cars with manual steering and floor shifts. Sorry, will not work on column shifts. The Factory Power Steering Box and Pump must be removed and replaced with a manual steering unit.

A replacement module for all of our 220 watt Electra-Steer kits.

This is a replacement motor for all Electra-Steer 360 watt electric kits. Shaft ends are 17MM - 36 splines.

Electra-Steer U-Joints can be found here

Tired of muscling your old Mustang around? Don’t want a new front-end? Want to keep the stock look of the steering box? Unisteer is pleased to help you with all of the above with our Electra-Steer drop in Column Kit. Unisteer combined our great 360w Electra-Steer motor with Ididit’s unsurpassed retrofit column for a drop in power steering solution for your 1965-66 Mustang. Everything is included! Motor, column, new pedal assemble, and the power steering motor will tuck up underneath the dash.

Note: This unit is only for 65-66 model Mustang cars with manual steering boxes and automatic transmissions. Sorry, will not work on column shifts.

Unisteer is pleased to offer our Electra-Steer drop in Column Kit for early Camaros. Unisteer combined our great 360w Electra-Steer motor with Ididit's unsurpassed retrofit column for a drop in power steering solution for your 1967-68 Camaro. Everything is included! Motor, column, and the power steering motor will tuck up underneath the dash. New pedals are not needed with this kit.

Note: This unit is only for '67-'68 model Camaro cars with manual steering and floor shifts. Sorry, will not work on column shifts. If you have Power Steering, it must be removed & replaced with a manual steering box or check out our manual Rack & Pinion Kit.

Tired of muscling your old Tri-5 around? Don’t want a new front-end? Want to keep the stock look of the steering box? Unisteer is pleased to help you with all of the above with our Electra-Steer drop in Column Kit. Unisteer combined our great 360w Electra-Steer motor with Ididit’s unsurpassed retrofit column for a drop in power steering solution for your 1955-56 Chevy. Everything is included! Motor, column, new pedal assemble, and the power steering motor will tuck up underneath the dash.

Note: This unit is only for 55-56 model Tri-5 cars with manual steering boxes and floor shifts. Sorry, will not work on column shifts.

Tired of muscling your old Tri-5 around? Don’t want a new front-end? Want to keep the stock look of the steering box? Unisteer is pleased to help you with all of the above with our Electra-Steer drop in Column Kit. Unisteer combined our great 360w Electra-Steer motor with Ididit’s unsurpassed retrofit column for a drop in power steering solution for your 1955-56 Chevy. Everything is included! Motor, column, new pedal assemble, and the power steering motor will tuck up underneath the dash.

Note: This unit is only for 55-56 model Tri-5 cars with manual steering boxes and floor shifts. Sorry, will not work on column shifts.