Electric Power Steering Columns

Steering column adapter for 1967-69 Camaro and 1968-74 Nova with stock column. This is necessary for both power and manual rack kits in conjunction with the appropriate shaft kit for a stock column. This will adapt the u-joint provided in one of our shaft kits to the bottom of the rag joint on the stock column. Making it a 1" - 48 connection.

TRI-5 Steering Column Bushing W/Bearing. Anyone using our Tri-5 Rack & Pinion kit on their Chevy with a stock column should check this out.

CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

This retrofit column is designed to fit your Chevy Tri-Five and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. (However, It is strongly recommended to use our Ididit Tri-Five Floor Mount 8023280 for this application.) Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Retro Knobs and Levers
• 3 7/8" Wiring Plug
• 1" DD Lower Shaft

The Classic Chevy Floor Mount uses the two original holes in the floor of your 55-57 Chevy to mount the bracket. Comes complete with a clamp to secure the bracket to the column. This floor mount is strongly recommended for all Chevy Tri-Five installations.

This inexpensive floor mount will secure your column at the floor board or firewall, and can adjust to fit any angle.

This retrofit column is designed to fit your Chevelle, El Camino, or GTO and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 1" 48 Shaft

This kit will not only secure your column, but it will also add style and class to your interior. Kit includes an adjustable floor mount and polished aluminum trim ring with hardware. Look at our vinyl boots to cover the mount that come in a couple of different colors.

Unisteer's Improved Electra-Steer is a compact electric assist unit that reduces steering effort by up to 35% compared to traditional manual steering units. The column's overall length is 39", but can be modified upon request.

Note: If you wish to receive a custom length column, please Click Here for a custom design form to fill out with your order.

Includes:

• Improved Electra-Steer built into Ididit column (motor, module, & wiring)
• 2 inch Ididit Floor Shift Tilt Chrome Steering Column
• Cut to fit lower steering shaft

Click Here to Look at Product Instructions

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item is fully collapsible. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• 4-Way Flashers
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item has a collapsible inner shaft. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This Corvette Wheel Adaptor allows you to use your original steering wheel with the Ididit column. A horn kit will need to be purchased separately if you want the horn to work.

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item has a collapsible inner shaft. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item has a collapsible inner shaft. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Camaro or Firebird and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Note: Ignition excluded on 1969 Firebird. Call ididit to find out why.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Shaft

This kit will not only secure your column, but it will also add style and class to your interior. Kit includes an adjustable floor mount and polished aluminum trim ring with hardware, as well as a vinyl boot to cover the mount.

The Ididit swivel ball floor mount has a trim ring for the engine compartment side. Includes all the necessary hardware for installation. Available in polished aluminum. For aftermarket columns only. This floor mount is bored out more due to the thickness of the column finishes.

Ididit's 1955-68 Horn Kit has everything you need to adapt most 55-68 GM stock steering wheels to your Ididit steering column. Comes complete with aluminum trim ring, horn contact plate, spring, pin, and retainer.

This wiring kit is used to adapt your Corvette stock wiring to your Ididit Column, while adding the safety of a 4-way flasher to your vehicle.

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item is fully collapsible. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• 4-Way Flashers
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Nova and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Chevelle, El Camino, or GTO and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Comes complete with a neutral safety switch (shift indicator not included) The shift pattern on this column will allow you to use either a 3 or 4-speed automatic transmission. A shift linkage is required for installation, and will attach to the lower shift arm provided on the column.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Shaft

This retrofit column is designed to fit your Chevelle, El Camino, or GTO and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 1" 48 Shaft

This retrofit column is designed to fit your Chevelle, El Camino, or GTO and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 1" DD Shaft

This wiring kit is used to adapt your Chevy stock wiring to your Ididit column, while adding the safety of a 4-way flasher to your vehicle.

This adaptor is simply made to adapt the 3-bolt pattern of the tapered, splined top shaft of a steering column. All ididit adaptors will fit most ididit columns as well as most 1969 or newer GM passenger car columns. The adaptor is secured to the top of the column with a single nut. A horn wire is included with most adaptors. Standard size is 1.25" deep.

This adaptor is simply made to adapt the 3-bolt pattern of the tapered, splined top shaft of a steering column. All ididit adaptors will fit most ididit columns as well as most 1969 or newer GM passenger car columns. The adaptor is secured to the top of the column with a single nut. A horn wire is included with most adaptors. Standard size is 1.25" deep.

This adaptor is simply made to adapt the 6-bolt pattern of the tapered, splined top shaft of a steering column. All ididit adaptors will fit most ididit columns as well as most 1969 or newer GM passenger car columns. The adaptor is secured to the top of the column with a single nut. Standard size is 2.5" deep.

The ididit swivel ball floor mount has a trim ring for the engine compartment side. Includes all the necessary hardware for installation.Available in polished aluminum. For aftermarket columns only.

ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes.

Made in America

ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes.

Made in America

This column drop is designed to fit a 1932 ford, and it's standard length is 5". They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes.

Made in America

ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes.

Made in America

ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes.

Made in America

ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes.

Made in America

ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes.

Made in America

ididit steering column drops and underdash mounts are designed for a variety of applications. They're machined from Billet Aluminum, and this lustrous design is available in Brushed or Polished finishes.

Made in America

Ididit's simple, yet handsome Universal Straight Series columns are similar to factory columns, but are much cleaner in design. The column head is shorter in length compared to their tilt version, making this column smaller, yet completely functional. By requiring less space, you can fit this column into the smallest of driving compartments. Self-canceling turn signals, 4-way flashers, horn wiring, and their standard dress-up kit are included with this column.

Note: A Steering Wheel Adaptor is required for a '69 or newer GM Passenger Car.

Includes:

• 2" Tube Diameter
• 3/4" DD Output Shaft

This retrofit column is designed to fit your C10. This Chevy Style column features all Chevy wiring and a C10 top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item has a collapsible inner shaft. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item is fully collapsible. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• 4-Way Flashers
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

Due to lack of space in front of the dash, the 1958-62 Corvette column is only available in straight floor shift

This retrofit column is designed to fit your Corvette. Simply remove your old column, saving your original under-dash mount. You will be required to fabricate your own floor mount. The solid shaft that extends from inside the gearbox to the steering wheel will need to be cut and modified to fit the coupler. Using this installation kit, install your new steering column in place of the old.

Includes:

• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Chevy Tri-Five and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. (However, It is strongly recommended to use our Ididit Tri-Five Floor Mount 8023280 for this application.) Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Retro Knobs and Levers
• 3 7/8" Wiring Plug
• 1" DD Lower Shaft

The Ididit 9-bolt shorty adaptor is uniquely designed to move the bolting surface of the steering wheel 2" closer to the dash, giving you that extra room. Caution should be taken when using this adaptor.

Please Note: The clearance needed between the wheel and the turn signal lever, and/or shift arm. Modifications may be necessary for proper installation.

This wiring kit is used to adapt your Nova and Corvette stock wiring to your Ididit column, while adding the safety of a 4-way flasher to your vehicle.

This retrofit column is designed to fit your Chevy Tri-Five and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. (However, It is strongly recommended to use our Ididit Tri-Five Floor Mount 8023280 for this application.) Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Retro Knobs and Levers
• 3 7/8" Wiring Plug
• 1" DD Lower Shaft

This wiring kit is used to adapt your Chevy, Nova, and Corvette stock wiring to your Ididit column, while adding the safety of a 4-way flasher to your vehicle.

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item is fully collapsible. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• 4-Way Flashers
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item is fully collapsible. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• 4-Way Flashers
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This Corvette Wheel Adaptor allows you to use your original steering wheel with the Ididit column. A horn kit will need to be purchased separately if you want the horn to work.

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 3/4" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle, and feature a removable, indexable lower shift arm. With 12 possible positions, adjustability is just a turn of the wrench away!

Note: This column does NOT come with a Neutral Safety Switch. If you have a transmission mounted switch, a neutral safety switch is not needed.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle, and feature a removable, indexable lower shift arm. With 12 possible positions, adjustability is just a turn of the wrench away!

Note: This column does NOT come with a Neutral Safety Switch. If you have a transmission mounted switch, a neutral safety switch is not needed.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle, and feature a removable, indexable lower shift arm. With 12 possible positions, adjustability is just a turn of the wrench away!

Note: This column does NOT come with a Neutral Safety Switch. If you have a transmission mounted switch, a neutral safety switch is not needed.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle, and feature a removable, indexable lower shift arm. With 12 possible positions, adjustability is just a turn of the wrench away!

Note: This column does NOT come with a Neutral Safety Switch. If you have a transmission mounted switch, a neutral safety switch is not needed.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle, and feature a removable, indexable lower shift arm. With 12 possible positions, adjustability is just a turn of the wrench away!

Note: This column does NOT come with a Neutral Safety Switch. If you have a transmission mounted switch, a neutral safety switch is not needed.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle, and feature a removable, indexable lower shift arm. With 12 possible positions, adjustability is just a turn of the wrench away!

Note: This column does NOT come with a Neutral Safety Switch. If you have a transmission mounted switch, a neutral safety switch is not needed.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle, and feature a removable, indexable lower shift arm. With 12 possible positions, adjustability is just a turn of the wrench away!

Note: This column does NOT come with a Neutral Safety Switch. If you have a transmission mounted switch, a neutral safety switch is not needed.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle, and feature a removable, indexable lower shift arm. With 12 possible positions, adjustability is just a turn of the wrench away!

Note: This column does NOT come with a Neutral Safety Switch. If you have a transmission mounted switch, a neutral safety switch is not needed.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

ididit Universal Tilt Series columns have become one of the most popular steering columns around, and are an industry standard. They offer top quality performance and beauty to your vehicle.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Horn Wiring
• 1" DD Output Shaft

This retrofit column is designed to fit your Chevy Tri-Five and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. (However, It is strongly recommended to use our Ididit Tri-Five Floor Mount 8023280 for this application.) Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Retro Knobs and Levers
• 3 7/8" Wiring Plug
• 1" DD Lower Shaft

This retrofit column is designed to fit your Mustang. This Ford Style column features all Ford wiring and a Ford top shaft. It will bolt to your stock box or rack & pinion system. Simply remove your old column, saving your original under-dash mount. This item is fully collapsible. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Ford Turn Signal Switch
• 4-Way Flashers
• Ford Style Knobs and Levers
• Ford Top Shaft
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Nova and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Comes complete with a neutral safety switch (shift indicator not included) The shift pattern on this column will allow you to use either a 3 or 4-speed automatic transmission. A shift linkage is required for installation, and will attach to the lower shift arm provided on the column.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Nova and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Comes complete with a neutral safety switch (shift indicator not included) The shift pattern on this column will allow you to use either a 3 or 4-speed automatic transmission. A shift linkage is required for installation, and will attach to the lower shift arm provided on the column.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Nova and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Nova and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Nova and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Comes complete with a neutral safety switch (shift indicator not included) The shift pattern on this column will allow you to use either a 3 or 4-speed automatic transmission. A shift linkage is required for installation, and will attach to the lower shift arm provided on the column.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Nova and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Comes complete with a neutral safety switch (shift indicator not included) The shift pattern on this column will allow you to use either a 3 or 4-speed automatic transmission. A shift linkage is required for installation, and will attach to the lower shift arm provided on the column.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Nova and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount and floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This retrofit column is designed to fit your Chevelle, El Camino, or GTO and does NOT require modification of your original vehicle to install. Simply remove your old column, saving your original under-dash mount as well as the original floor mount. Using this installation kit you will be able to install your new steering column in place of the old.

Comes complete with a neutral safety switch (shift indicator not included) The shift pattern on this column will allow you to use either a 3 or 4-speed automatic transmission. A shift linkage is required for installation, and will attach to the lower shift arm provided on the column.

Note: Ignition excluded on 1969-70 GTO. Call ididit to find out why.

Includes:

• 8-Position Tilt
• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 1" 48 Shaft