Electric Power Steering Columns

This Corvette Wheel Adaptor allows you to use your original steering wheel with the Ididit column. A horn kit will need to be purchased separately if you want the horn to work.

Ididit's 1955-68 Horn Kit has everything you need to adapt most 55-68 GM stock steering wheels to your Ididit steering column. Comes complete with aluminum trim ring, horn contact plate, spring, pin, and retainer.

This wiring kit is used to adapt your Corvette stock wiring to your Ididit Column, while adding the safety of a 4-way flasher to your vehicle.

Due to lack of space in front of the dash, the 1958-62 Corvette column is only available in straight floor shift

This retrofit column is designed to fit your Corvette. Simply remove your old column, saving your original under-dash mount. You will be required to fabricate your own floor mount. The solid shaft that extends from inside the gearbox to the steering wheel will need to be cut and modified to fit the coupler. Using this installation kit, install your new steering column in place of the old.

Includes:

• Self Canceling Turn Signals
• 4-Way Flashers
• Knobs and Levers
• 3 7/8" Wiring Plug
• 3/4" 36 Lower Shaft

This Corvette Wheel Adaptor allows you to use your original steering wheel with the Ididit column. A horn kit will need to be purchased separately if you want the horn to work.

This wiring kit is used to adapt your Chevy stock wiring to your ididit column, while adding the safety of a 4-way flasher to your vehicle.