1960-65 Ford Falcon/Comet Power Rack & Pinion Kit, Black
Product# 8010720-01-01Regular price $1,490.00 Save $-1,490.00
Unisteer's Falcon / Comet Power Kit uses a rear steer traditional style rack & pinion that has been machined down to match the stock suspension of the Falcons. This rack comes mounted to a one piece U-shapped bracket that bolts up to the back side of your stock motor / frame mounts. Slide the bracket up into place and install with our longer bolts. If you do not want to deal with a power steering pump, we also have this kit available with a manual unit.
Installs on these cars have been done with stock manifolds or Hooker Super Comp Headers. Other headers may work with modification. Tri-Y style headers do not work. This kit works with V8 motors and floor shifters. This kit will not work with the factory column shifter, but it will work with an aftermarket column shifter. If you have a different engine, let us know and we will try to accommodate you with a different pump bracket.
This kit is designed to work with 1963-64 Ford Falcon/Comet V-8 spindles. Other year Falcon/Comet spindles may not work. Cars with Granada spindles will NOT work.
|Tech Info:||Kit Includes:|
|Pinion Type / Size:||17mm DD||Rack & Pinion|
|Amount of Travel:||5.25"||Outer Tie Rod Ends|
|Turns Lock to Lock:||2.5 Turns||Mounting Bracket|
|Pressure Port Size:||Banjo 6 AN (Lower)||Pump & Line Kit|
|Return Port Size:||Banjo 6 AN (Upper)||Steering Shaft Kit|
|Pump Required:||Low Flow / Pressure||Mounting Hardware|
|Inner End Threads:||9/16"-18|
Click Here to Look at Product Instructions