Chevrolet

This is a front steer center take off style rack & pinion that matches the stock front end and suspension. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts.

Our kit probably will not work with aftermarket suspension that change the original suspension, but give us a call!

This kit works on most big block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available.

Note: Kit can be adapted to fit your needs by selecting the pulley option above.

This is a front steer center take off style rack & pinion that matches the stock front end and suspension. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts.

Our kit probably will not work with aftermarket suspension that change the original suspension, but give us a call!

This kit works on most big block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available.

Note: Kit can be adapted to fit your needs by selecting the pulley option above.

This is a front steer center take off style rack & pinion that matches the stock front end and suspension. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts.

Our kit probably will not work with aftermarket suspension that change the original suspension, but give us a call!

This kit works on most small block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available.

Note: Kit can be adapted to fit your needs by selecting the pulley option above.

This is a front steer center take off style rack & pinion that matches the stock front end and suspension. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts.

Our kit probably will not work with aftermarket suspension that change the original suspension, but give us a call!

This kit works on most small block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available.

Note: Kit can be adapted to fit your needs by selecting the pulley option above.

Similar to our earlier model Impala / Bel Air Rack, this kit uses a rear steer center take off rack & pinion. The mounting bracket consists of a one piece bracket that spans the frame rail plus an adaptor plate for the passenger side frame rail that uses the same steel rod mount that the factory used for the idler arm. (Check out our instructions for pictures!) This kit will fit with Small Block motor applications with stock manifolds or Hooker Long Tube headers. Other headers may work with modification or an extra u-joint. The kit does clear the Z-Bar and 4 Speed Linkage. This kit has not worked in Big Block applications.

Click here to view installation instructions

This kit includes an UNPOLISHED C-5 TC low flow pump, and TC reservoir for a long water pump Big Block engine.

This kit includes an UNPOLISHED C-5 TC low flow pump and TC resevoir for a short water pump Big Block engine.

This bracket kit is designed to be used with our GM Type II/TC power steering pump.

This kit includes a POLISHED C-5 TC pump with OE fitting low, and remote reservoir for a long water pump Big Block engine.

This kit includes a POLISHED C-5 pump with OE fitting low, and a remote resevoir for a short water pump Big Block engine.

This power steering pump kit is designed to compliment our Chevy Rack-Only kits. This kit includes a POLISHED pump and POLISHED remote resevoir for a short water pump Small Block engine. The pump is a high flow pump running at about 1500 psi and 3 gpm.

This kit includes an UNPOLISHED C-5 TC low flow pump, and TC resevoir for a short water pump Small Block engine. High Mount on Motor.

Low Mount pump.

Includes:

• Unpolished C-5 TC low flow pump
• TC resevoir for a short water pump Small Block engine.

This kit includes a POLISHED C-5 pump with OE fitting low, and remote resevoir for a long water pump Small Block engine.