Steering Shaft Kits

Tri-5 Steering Shaft Kit fits 1"DD/3/4/-36 Steering Columns.

Kit includes

• Steering Shaft
• Stainless Search By Product/U-Joints
• Column Adapters

CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

To facilitate the installation of Unisteer's Power Rack & Pinion kit for '67-'69 Camaros and '68-'74 Novas. This U-Joint kit is to be used in these vehicles that are using big block engines or large headers on a small block. This kit will fit either the factory column adapter 8020820, (sold separately) or a 1"-48 Aftermarket Column.

Includes:

• Stainless Steel U-Joints
• Splined 3/4" DD Shaft Segments
• Support Bearing
• Mounting Bracket

Click Here to Look at Product Instructions

To facilitate the installation of Unisteer's Power Rack & Pinion kit for '67-'69 Camaros and '68-'74 Novas. This U-Joint kit is to be used in these vehicles that are using small block engines. This kit will fit either the factory column adapter 8020820, (sold separately) or a 1"-48 Aftermarket Column.

Includes:

• Stainless Steel U-Joints
• Splined 3/4" DD Shaft Segments

Click here to view installation instructions.

To facilitate the installation of Unisteer's Manual Rack & Pinion kit for '67-'69 Camaros and '68-'74 Novas. Unlike the Power Camaro Shaft kits, this kit can be used on vehicles with big block or small block engines. This kit will fit either the factory column adapter 8020820, (sold seperately) or a 1"-48 Aftermarket Column.

Includes:

• Stainless Steel U-Joints
• Splined 3/4" DD Shaft Segments
• Support Bearing
• Mounting Bracket

CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

This steering shaft kit is designed to compliment our Chevelle Rack-Only kit.

This kit is for use with our Tri-5 Rack & Pinion kit being installed on small block cars that have header clearance. With header clearance, this is the easiest way to connect the rack & pinion up to the column.

The kit consists of two Search By Product/U-Joints, one already welded to long section of smooth shaft, all one need do is mock up their steering linkage and cut off the shaft at correct length. Then drill and pin the second U-joint to the shaft with the provided hardware, or weld if you prefer.

Click here for shaft instructions.

To facilitate the installation of Unisteer's Power Rack & Pinion kit for 1962-67 Chevy II. This kit is designed to fit 3/4"-36 Aftermarket Columns.

Includes:

• Stainless Steal U-Joints
• 3/4"-36 Shaft Segments
• Suport Bearing
• Mounting Bracket

To facilitate the installation of Unisteer's Power Rack & Pinion kit for 1962-67 Chevy II. This kit is designed to fit Factory Columns where the column conection is 3/4" - Smooth.

Includes:

• Stainless Steal U-Joints
• Factory Shaft Segments
• Suport Bearing
• Mounting Bracket

To facilitate the installation of Unisteer's Manual Rack & Pinion kit for 1962-67 Chevy II. This kit is designed to fit Factory Aftermarket Columns.

Includes:

• Stainless Steal U-Joints
• Factory Shaft Segments
• Suport Bearing
• Mounting Bracket

To facilitate the installation of Unisteer's Power Rack & Pinion kit for '67-'69 Camaros and '68-'74 Novas. This U-Joint kit is to be used in these vehicles that are using big block engines or large headers in a small block, and this kit fits on a 3/4"-36 Aftermarket Column.

Includes:

• Stainless Steel U-Joints
• Splined 3/4" DD Shaft Segments
• Support Bearing
• Mounting Bracket

Click Here to Look at Product Instructions

This steering shaft kit is designed to compliment our Chevelle Rack-Only kit.

If converting from a power rack to a manual long pinion rack, this is the shaft linkage for you. This shaft consists of two black U-joints, a section of shaft, and a tongue for the Mustang. This shaft will complete your steering linkage from your manual rack & pinion to your factory column.

Click here to view product instructions

To facilitate the installation of Unisteer's Power Rack & Pinion kit for '67-'69 Camaros and '68-'74 Novas. This U-Joint kit is to be used in these vehicles that are using big block engines or large headers in a small block, and this kit fits on a 1"-DD Aftermarket Column.

Includes:

• Stainless Steel U-Joints
• Splined 3/4" DD Shaft Segments
• Support Bearing
• Mounting Bracket

Click Here to Look at Product Instructions

This is the column shaft kit for a 1968-82 Corvette Unisteer Power Rack and Pinion Kit. This shaft kit goes with rack number 8011540. This kit comes with everything needed to connect the Unisteer Power Rack kit to the Corvette steering column.

Click Here to Look at Product Instructions

This is the column shaft kit for a 1963-67 Corvette Unisteer Power Rack and Pinion Kit. This shaft kit goes with rack number 8011540 and is used for columns with a 3/4-36 splined column. This kit comes with everything needed to connect the Unisteer Power Rack kit to the Corvette steering column.

Click Here to Look at Product Instructions

To facilitate the installation of Unisteer's Manual Rack & Pinion kit for 1962-67 Chevy II. This kit is designed to fit 1"-DD Aftermarket Columns.

Includes:

• Stainless Steal U-Joints
• 1" DD Shaft Segments
• Suport Bearing
• Mounting Bracket

To facilitate the installation of Unisteer's Power Rack & Pinion kit for 1962-67 Chevy II. This kit is designed to fit 1"-DD Aftermarket Columns.

Includes:

• Stainless Steal U-Joints
• 1" DD Shaft Segments
• Suport Bearing
• Mounting Bracket

If converting from a power to a manual long pinion rack, this is the shaft kit for you. This shaft consists of two Stainless Steel U-joints, a section of shaft, and a tongue for the Mustang. This shaft will complete your steering linkage from your new manual rack & pinion to the factory column.

Click Here to Look at Product Instructions

To facilitate the installation of Unisteer's Manual Rack & Pinion kit for '67-'69 Camaros and '68-'74 Novas. Unlike the Power Camaro Shaft kits, this kit can be used on vehicles with big block or small block engines, and this kit will fit with a 1"-DD Aftermarket Column.

Includes:

• Stainless Steel U-Joints
• Splined 3/4" DD Shaft Segments
• Support Bearing
• Mounting Bracket

CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

Steering shaft kit for 1967-'69 Camaros/1968-'74 Novas with the Unisteer power rack & pinion and a 1"-DD Aftermarket Column. This kit is for vehicles using stock exhaust manifolds on small block engines.

Note: We strongly suggest using the big block shaft kit for any small block using aftermarket headers: 8050550

Includes:

• Stainless Steel U-Joints
• 3/4" DD Shaft Segment

Click Here to Look at Product Instructions

This steering shaft kit is designed to compliment our Chevelle Rack-Only kit.

This steering shaft kit is designed to compliment our Chevelle Rack-Only kit.

The shaft that is needed to turn your manual Mustang rack & pinion into a power rack & pinion. This shaft consists of two Stainless Steel U-joints, a section of shaft, and a tongue for the Mustang. This shaft will complete your steering linkage from your power rack & pinion to the factory column.

Click Here for Shaft Instructions

This steering shaft kit is designed to compliment our Chevelle Rack-Only kit.

CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

This steering shaft kit is designed to compliment our Chevelle Rack-Only kit.

This kit is designed to facilitate the installation of Unisteer's Rack & Pinion kit for 1987-95 Jeep YJ. This shaft kit measures 31" end to end with u-joints and 38.5" at its longest lenght, but is trimible to become shorter.

Includes:

• Stainless Steal U-Joints
• Shaft Segments

Click Here to Look at Product Instructions

This kit is designed to facilitate the installation of Unisteer's Rack & Pinion kit for 1976-86 Jeep CJ.

Includes:

• Stainless Steal U-Joints
• Shaft Segments

Click Here to Look at Product Instructions

To facilitate the installation of Unisteer's Manual Rack & Pinion kit for 1962-67 Chevy II. This kit is designed to fit 3/4"-36 Aftermarket Columns.

Includes:

• Stainless Steal U-Joints
• 3/4"-36 Shaft Segments
• Suport Bearing
• Mounting Bracket

To facilitate the installation of Unisteer's Power Rack & Pinion kit for '67-'69 Camaros and '68-'74 Novas. This U-Joint kit is to be used in these vehicles that are using small block engines, and this kit fits on a 3/4"-36 Aftermarket Column.

Includes:

• Stainless Steel U-Joints
• 3/4" DD Shaft Segment

Click Here to Look at Product Instructions

To facilitate the installation of Unisteer's Manual Rack & Pinion kit for '67-'69 Camaros and '68-'74 Novas. Unlike the Power Camaro Shaft kits, this kit can be used on vehicles with big block or small block engines, and this kit will fit with a 3/4"-36 Aftermarket Column.

Includes:

• Stainless Steel U-Joints
• Splined 3/4" DD Shaft Segments
• Support Bearing
• Mounting Bracket

CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

If converting your long pinion manual rack to a power rack, this is the steering linkage for you. This shaft consists of two Stainless Steel U-joints, a section of shaft, and a tongue for the Mustang. This shaft will complete your steering linkage from your power rack & pinion to the factory column.

Click Here to View Installation Instructions

This is the column shaft kit for a 1963-67 Corvette Unisteer Manual Rack and Pinion Kit. This shaft kit goes with rack number 8001590 and is used for columns with a 3/4-36 splined column. This kit comes with everything needed to connect the Unisteer Power Rack kit to the Corvette steering column.

CLICK HERE TO LOOK AT PRODUCT INSTRUCTIONS

This kit is designed to facilitate the installation of Unisteer's Rack & Pinion kit for 1995-03 Dodge Truck.

Includes:

• Stainless Steal U-Joints
• Shaft Segments

Click Here to Look at Product Instructions

This shaft is designed to take the abuse of off-roading, and are corrosion resistant. This shaft will complete your steering linkage from your rack & pinion to the factory column, and comes with Unisteer's Limited Lifetime Warranty.

Click Here to Look at Product Instructions

This shaft is designed to take the abuse of off-roading, and are corrosion resistant. This shaft will complete your steering linkage from your rack & pinion to the factory column, and comes with Unisteer's Limited Lifetime Warranty.

Click Here to Look at Product Instructions