Ford

Outer tie rod end for 1960-65 Ford Falcon & Mercury Comet Unisteer Power rack and pinion kit with 6 cylinder spindles. Not included in the kit.

Outer tie rod end for 1960-65 Ford Falcon & Mercury Comet Unisteer Power rack and pinion kit with 8 cylinder spindles. Also for the Ford Galaxie and E-Body Mopars.

Included in kits:

• 8010660-01 1970-74 Mopar E Body Small Block Power Rack & Pinion Kit, Black
• 8010670-01 1970-74 Mopar E Body Big Block Power Rack & Pinion Kit, Black
• 8010720-01 1960-65 Ford Falcon/Comet Power Rack & Pinion Kit, Black
• 8012350-01 1965-67 Ford Galaxie 500 Rack & Pinion Kit

One of Unisteer's own builds, we used a center take off style rack mounted to a one piece U-shapped bracket that bolts up to the back side of your stock motor / frame mounts. Slide the bracket up into place and install with our longer bolts.

Installs on these cars have been done with stock manifolds or Hooker Super Comp Headers. Other headers may work with modification. Tri-Y style headers do NOT work. This kit works with V8 motors and floor shifters. This kit will not work with the factory column shifter, but it will work with an aftermarket column shifter.

If your Falcon or Comet had inline 6, the spindles have a different taper, just let us know and we can get you a different set of outers.

Note: We have run into cars with Granada spindles, and this kit will NOT work with those spindles.

One of Unisteer's own builds, we used a center take off style rack mounted to a one piece U-shapped bracket that bolts up to the back side of your stock motor / frame mounts. Slide the bracket up into place and install with our longer bolts.

Installs on these cars have been done with stock manifolds or Hooker Super Comp Headers. Other headers may work with modification. Tri-Y style headers do NOT work. This kit works with V8 motors and floor shifters. This kit will not work with the factory column shifter, but it will work with an aftermarket column shifter.

If your Falcon or Comet had inline 6, the spindles have a different taper, just let us know and we can get you a different set of outers.

Note: We have run into cars with Granada spindles, and this kit will NOT work with those spindles.

Unisteer's Falcon / Comet Power Kit uses a rear steer traditional style rack & pinion that has been machined down to match the stock suspension of the Falcons. This rack comes mounted to a one piece U-shapped bracket that bolts up to the back side of your stock motor / frame mounts. Slide the bracket up into place and install with our longer bolts. If you do not want to deal with a power steering pump, we also have this kit available with a manual unit.

Installs on these cars have been done with stock manifolds or Hooker Super Comp Headers. Other headers may work with modification. Tri-Y style headers do not work. This kit works with V8 motors and floor shifters. This kit will not work with the factory column shifter, but it will work with an aftermarket column shifter. If you have a different engine, let us know and we will try to accommodate you with a different pump bracket.

This kit is designed to work with 1963-64 Ford Falcon/Comet V-8 spindles. Other year Falcon/Comet spindles may not work. Cars with Granada spindles will NOT work.

Unisteer's Falcon / Comet Power Kit uses a rear steer traditional style rack & pinion that has been machined down to match the stock suspension of the Falcons. This rack comes mounted to a one piece U-shaped bracket that bolts up to the back side of your stock motor / frame mounts. Slide the bracket up into place and install with our longer bolts. If you do not want to deal with a power steering pump, we also have this kit available with a manual unit.

Installs on these cars have been done with stock manifolds or Hooker Super Comp Headers. Other headers may work with modification. Tri-Y style headers do not work. This kit works with V8 motors and floor shifters. This kit will not work with the factory column shifter, but it will work with an aftermarket column shifter. If you have a different engine, let us know and we will try to accommodate you with a different pump bracket.

This kit is designed to work with 1963-64 Ford Falcon/Comet V-8 spindles. Other year Falcon/Comet spindles may not work. Cars with Granada spindles will NOT work.

This kit includes a C-5 pump w/res. high flow GM 6, and TC clip-on resevoir for a Big Block engine.

This bracket kit is designed to be used with our GM Type II/TC power steering pump.

This bracket kit is designed to be used with our GM Type II/TC power steering pump.

This kit includes a C-5 pump w/res. high flow GM6, and TC resevoir for a Small Block engine.