Skip to product information
1949-51 Ford Power Rack & Pinion Kit w/o Headers

Rack and Pinion - Power - 1949-51 Ford - Flat Head - 8012540

 
SKU: 8012540

Our kit is designed to fit in your stock Ford. It uses a one piece folded steel bracket that bolts in place where your idler arm and steering box used to be. It follows the same pivot points as your stock geometry therefor eliminating bump steer. The headers will provide an obstical and will most likely need to be modified. There isn't any loss in the factory turning radius. The pump kit is matched to the rack & pinion providing the correct flow and pressure for the optimal driving experience.

Note: Granada spindles have been used on this vehicle from time to time. If you have these, let us know with the drop down menu above so we can swap out the proper outer ends. Does not work with Automatic Columns.

Tech Info:

Pinion Type/Size:  17mm DD

Amount of Travel:  5.25"

Turns Lock to Lock:  2.5 Turns

Pressure Port Size:  6AN Banjo (Lower)

Return Port Size:  6AN Banjo (Upper)

Pump Required:  Low Flow / Pressure

Inner End Threads:  9/16" - 18

Outer Ends:  Included

Granada Outer Ends:  8021250

Kit Includes:

Rack and Pinion

Mounting Bracket

Mounting Hardware

Outer Tie Rod Ends

Pump and Line Kit

Steering Shaft Kit