1949-51 Ford Power Rack & Pinion Kit w/o Headers
Product# 8012540-01Regular price $1,965.00 Save $-1,965.00
Our kit is designed to fit in your stock Ford. It uses a one piece folded steel bracket that bolts in place where your idler arm and steering box used to be. It follows the same pivot points as your stock geometry therefor eliminating bump steer. The headers will provide an obstical and will most likely need to be modified. There isn't any loss in the factory turning radius. The pump kit is matched to the rack & pinion providing the correct flow and pressure for the optimal driving experience.
Note: Granada spindles have been used on this vehicle from time to time. If you have these, let us know with the drop down menu above so we can swap out the proper outer ends. Does not work with Automatic Columns.
|Tech Info:||Kit Includes:|
|Pinion Type / Size:||17mm DD||Rack & Pinion|
|Amount of Travel:||5.25"||Outer Tie Rod Ends|
|Turns Lock to Lock:||2.5 Turns||Mounting Bracket|
|Pressure Port Size:||6AN Banjo (Lower)||Pump & Line Kit|
|Return Port Size:||6AN Banjo (Upper)||Steering Shaft Kit|
|Pump Required:||Low Flow / Pressure||Mounting Hardware|
|Inner End Threads:||9/16"-18||Headers|
|Granada Outer Ends||8021250|
Click Here to Look at Product Instructions