Skip to product information
1958-62 Corvette Power Rack & Pinion Kit w/ Column

Rack and Pinion - Power - with Column - 1958-62 Corvette - 262-400 - Short Water Pump - 8012420

SKU: 8012420

This is a complete kit that starts with a rear steer center take off style rack & pinion made to match the stock suspension of these Corvettes. The rack is mounted to a one piece bracket that mounts to the stock motor mounts. The kit does clear the z-bar and 4 speed linkage. This kit works on Small Block motor cars with stock manifolds or Shorty headers. Other headers may work with modification.

This kit is complete, everything that you need is included. The shaft kits use three u-joints and a support bearing. This connects up with a new Ididit retrofit column. You must use the column to use this kit! Floor Bracket and Gasket are included. A pump kit with bracket to mount to the block is included which comes with a remote reservoir, single V-groove pulley and lines. We also include the hub adaptor and flasher kit. UniSteer's most detailed kit!

Click to view instruction sheet

Tech Info:

Pinion Type/Size:  17mm DD GM

Amount of Travel:  6"

Turns Lock to Lock:  2.5-2.75 Turns

Pressure Port Size:  18mm - 6AN Banjo (Lower)

Return Port Size:  16mm - 6AN Banjo (Upper)

Pump Required:  Low Flow / Pressure

Inner End Threads:  M14 x 1.5

Outer ends:  8020940

Kit Includes:

Rack and Pinion

Mounting Bracket

Mounting Hardware

Pump and Line Kit

Steering Shaft Kit

Ididit Column